Choice principle and attention

1、It is important to consider of the ferrous contain , the request of separation , the using environment and the characteristic of the separator self at the same time when choosing the separator .

2、When the ferrous materials are so much , we should choose the electromagnetic or permanent magnetic separator with the continuing self-cleaning iron ability .（RCDC、RCDD、RCDF、RCYC、RCT and CFLT Series）.

3、When the ferrous contain of material is so little , you should choose the electromagnetic or permanent magnetic separators which cleaning iron artificially （Series RCDA、RCDB、RCDE and RCY）.Lower the hanging height appropriately , and benefit to separate iron .

4、while using in the serious powder and dust environment , should choose the whole closing separators such as RCDB、RCDE、RCDD、RCDF series electromagnetic separators and RCYB、RCYD series permanent magnetic separators .

5、 The separator is easy to separate iron when installed above the belt terminal because the materials are lax , but the driving roller in the bottom of separator must be made of non-magnetic materials .

6、when the separator installed above the belt central part ( namely cross arrange), The WCG series no-magnetic straight line rollers can be installed under the belt to exalt the separate result.

7、 For the no-ferrous metals which can't be attached by the separator , should choose the GJT series metal detector to detect and give a alarm , then pick them out artificially .

8、The separators separate iron with the characteristic as flowing : it is easier to absorb the bigger or longer iron than the smaller or shorter ones , the sharp ones easier than the globosity ones , the moving ones easier than the still ones . For the higher separation request , it should increase the separators' specification or adopt two classes separation .

9、 Adopting several-class separation, the separation attraction of empress class should higher than the ex- class, otherwise , the separation result of empress class not so perfect.

10 、When seldom iron contain in the material , adopt the GJT series metals detectors to be used with the electromagnetic self-cleaning separators to save the electric power and increase the separation result .

11、 There are various ways to separate the iron from magnetism materials, meeting the complicated circumstance , you'd better match with technical department of our company mutually , jointly research to obtain the satisfaction result.